Denver Kitchen Remodel GuideDenver, CO · Matching service Get matched

Denver Kitchen Remodel Guide is a free referral service, not a contractor. Independent pros pay us when we match you — How we're paid.

Denver, CO · Updated

Permit rules for new kitchen cabinets in Denver

The typical cost of cabinet refacing ranges from $4,100 to $9,750, covering labor and materials.

Free for Denver homeowners. One pro, named before they contact you.

Part of the Cabinet Refacing guide for Denver homeowners.

Replacing existing kitchen cabinets in Denver does not require a permit (Residential Interior Remodel - City and County of Denver (CPD)). However, if the remodel involves altering the floor plan, changing load-bearing walls, adding or moving doorways or windows, rerouting ductwork, or adding or relocating electrical or plumbing fixtures, a building permit is required (Residential Interior Remodel - City and County of Denver (CPD)). Denver adds a plan review fee equal to 50% of the building permit fee for projects valued over $2,000 (Building and Land Development Fees - City and County of Denver)

Do I need a permit to change kitchen cabinets in Denver historic areas?

In historic areas of Denver, you may need a permit for cabinet changes depending on the type of work and local regulations. Costs can vary based on whether permits are required and how they affect project timelines.

If your kitchen is in a historic district or landmarked building, you might face higher costs due to additional permitting requirements and preservation guidelines. Permits often add time and complexity to the process, which could increase overall expenses. Historic areas typically require approval from local preservation boards before starting work, and failure to obtain a permit may lead to fines or being forced to undo changes. These requirements apply regardless of whether you are installing stock, modular, or custom cabinets. The cost of cabinet refacing in Denver ranges from $4,100 to $9,750 depending on the scope and materials used.

Permitting processes can also delay your project timeline, which may lead to increased labor costs or scheduling conflicts. In historic districts, even minor changes like cabinet replacements could require review by preservation experts, adding to the cost of the job. If you are unsure whether a permit is needed for your specific location, contact local authorities or consult with professionals who specialize in historic renovations.

Denver kitchen remodel price bands

Denver kitchen remodel price bands
JobLowTypicalHighSource
Cabinet refacing$4,100$6,300$9,750modernize.com, 2026-09

Typical ranges from public data (modernize.com; September 2026), not a quote — your contractor's written contract sets the price.

Price ranges for cabinet refacing are based on national data adjusted for Denver, not a direct quote or estimate.

What changes the price in Denver

Local rules and conditions that change what you do, choose or pay for this job, each with its source. More rows: full table.

What in Denver changes a do i need a permit to put in new kitchen cabinets job
Local rule or conditionWhat it changesSource
Denver owner-occupants may pull permits without a contractor only for a single-family home; homeowner permits are not allowed for ADUs, townhomes, condos or duplexesA Denver homeowner may pull permits for a single-family home without a contractor (source).Applying for Permits as a Homeowner - City and County of Denver

Permit rules from Applying for Permits as a Homeowner - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

Get matched with one Denver pro

What kitchen remodel costs in Denver

The cost to obtain a permit for kitchen cabinet changes in Denver may vary, but it's often included in the overall project budget. Permitting is not always required, depending on the type of work and location.

In Denver, the cost to put in new kitchen cabinets can range from $4,100 to $9,750 for cabinet refacing. Permits may be required if you are making structural changes such as altering load-bearing walls or modifying plumbing and electrical systems.

Permit rules from FRED series RPPSERVERENT19740 (source: BEA Regional Price Parities). Rules change — confirm with the Denver building/permit office before you start.

Local data notes for Denver

A worked budget

A typical budget might include a cabinet refacing project costing between $4,100 and $9,750.

A worked budget
LineAmount
Local band typical$6,300
Illustrative total$6,300

Illustrative example based on the public data cited on this page (October 2026), not a quote — your contractor's written contract sets the price.

Plan review and licensing info for Denver kitchen cabinet permits

To learn about permit and licensing needs for Denver kitchen cabinet work, review local rules and qualifications. Here's a breakdown to guide your project planning and contractor selection process.

Contractors in Denver must hold or employ someone with a supervisor certificate or state electrical/plumbing license before applying for their own license (Contractor Licenses - City and County of Denver). If you're managing your own project, any work outside your skillset needs to be done by licensed professionals. This includes specialized tasks requiring specific training and experience in home remodeling projects like kitchen cabinet installations.

Related for Denver homeowners: Kitchen remodel faq for homeowners and When to Book Kitchen Remodel.

A Denver Class C supervisor certificate allows work on one- or two-family homes, including kitchen remodels. However, earning this certificate requires at least two years of hands-on experience with foundation, framing, and roofing tasks (Construction Certificates (Supervisor Certificates) - City and County of Denver). These requirements ensure contractors have the necessary background for residential home improvement projects in Denver neighborhoods like Lakewood or Aurora.

Permit rules from Contractor Licenses - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

DIY methods for adding cabinets to your kitchen in Denver, Colorado

DIY methods for adding cabinets to your kitchen in Denver, Colorado may not require a permit if changes are minor, but larger projects or structural alterations do.

If you're adding new cabinets that alter load-bearing walls or move plumbing fixtures, a permit becomes necessary (Residential Interior Remodel - City and County of Denver (CPD)). Small drywall repairs under one 4 ft by 8 ft sheet also don’t need approval. This applies to minor changes that do not affect the building’s structure or function.

For larger kitchen projects valued at $40,000, expect a building permit fee of approximately $340 plus an extra $170 for plan review (Building and Land Development Fees - City and County of Denver). If your remodel covers more than 2,500 sq ft, you must also have an approved waste diversion plan and pay a refundable deposit to proceed. These rules apply to ensure compliance with environmental standards during large-scale renovations in Denver homes.

How a Denver do i need a permit to put in new kitchen cabinets job runs, step by step

In Denver, permits for kitchen cabinets depend on the project’s value and scope. Permit fees vary based on valuation, with additional charges for plan review. Knowing these costs helps prepare financially.

If your kitchen cabinet project is valued at $6,300—typical for cabinet refacing—you may need a building permit depending on the work involved. Denver's building permit fee is $35 for work valued $501-$2,000, then $35 plus $8 per additional $1,000 up to $25,000 of valuation (Building and Land Development Fees - City and County of Denver) For projects over $2,000, a 50% plan review fee applies, which can add significantly to the total cost. These fees are paid at the CPD cashiering counter in Wellington Webb Municipal Building. If your project involves electrical or plumbing changes, separate permits may be required (Residential Interior Remodel - City and County of Denver (CPD)).

For projects valued over $25,000, Denver’s building permit fee increases to $220 for the first $25,000 plus $8 per additional $1,000. A kitchen remodel valued at $40,000 carries a building permit fee of about $340 plus about $170 plan review. If your project involves modifying the gross floor area by more than 2,500 sq ft, you may need to submit a waste diversion plan. Always check whether your work requires a permit based on its valuation and scope.

Permit rules from Building and Land Development Fees - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

How long common kitchen remodel options last and what to know (general industry sources, not local rules). More rows: full table.

How a Denver do i need a permit to put in new kitchen cabinets job runs, step by step
OptionTypical service lifeWhat to knowSource
Kitchen faucets15 yearsNAHB lists kitchen sink faucets at 15 years (source)NAHB/Bank of America Home Equity, Study of Life Expectancy of Home Components (Feb 2007), Table 1

Before you sign a kitchen remodel quote in Denver

Permit rules from Building and Land Development Fees - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

DIY limits for kitchen remodel in Denver

Homeowners may pull permits themselves if they own a single-family home in Denver (Applying for Permits as a Homeowner - City and County of Denver). However, DIY electrical or plumbing work requires passing an exam and living in the home for at least one year after completion. For cabinet refacing alone, a repair-only quote is recommended unless you have the required qualifications.

Permit rules from Applying for Permits as a Homeowner - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

Check a quote against the local band

$4,100–$9,750 per job

Next steps for your kitchen remodel project in Denver

  1. Contact Denver's Permit Center to confirm permit requirements based on project cost.
  2. Schedule an inspection during regular hours to avoid after-hours fees (Building and Land Development Fees - City and County of Denver).
  3. Verify if your home qualifies for a homeowner-permit.

Permit rules from Building and Land Development Fees - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

Common questions about permits for new kitchen cabinets

Do I need a permit to put in new kitchen cabinets in Denver?

For a kitchen remodel valued at $40,000, the building permit fee is about $340 plus about $170 plan review (Building and Land Development Fees - City and County of Denver). Yes, if the job exceeds $2,000.

How long does the demo/build part of a kitchen remodel take in Denver?

The demo/build phase typically takes two to four weeks depending on project complexity and contractor availability.

Permit rules from Building and Land Development Fees - City and County of Denver. Rules change — confirm with the Denver building/permit office before you start.

Sources and data (8)

Next step.

We match your Denver request with one independent pro and tell you who first.

  • Free to use.
  • One pro, not a list.
  • Name before contact.

Get matched with one Denver pro

Before they contact you, we give you the pro's name. Ask them for their license number and check it yourself — look it up at denvergov.org.

By Denver Kitchen Remodel Guide editorial. How these guides are made.

Page history
  • — First version

Content changes only; spelling and layout fixes are not listed.